# Model-Based Rendering

While Ren'Py is primarily used with two dimensional rectangular images that are common in visual novels, underneath the hood it has a model-based renderer intended to to take advantage of features found in modern GPUs. This allows for a number of visual effects that would not otherwise be possible.

As a warning, this is one of the most advanced features available in Ren'Py. In many cases, it's not necessary to understand how model-based rendering works behind the scenes - features like `matrixcolor` and Live2D support can be used without understanding how Model-Based rendering works, and more such features will be added to the understanding. This documentation is intended for very advanced creators, and for developers looking to add to Ren'Py itself.

Model-Based Rendering is one of the most advanced features in Ren'Py, and this documentation may be hard to understand without first looking at the OpenGL, OpenGL ES, GLSL, and GLSL ES manual. What's more, since there are portions of the models that are passed directly to your GPU drivers, which may accept erroneous inputs, it's important to check on multiple kinds of hardware.

## Models, Renders, and Drawing Operations

The fundamental thing that Ren'Py draws to the screen is a Model. A model consists of the following things:

- A Mesh of one or more triangles. A triangle consists of three vertices (corners), each of which contains a position in two or three-dimensional space, and may contain additional information, most commonly texture coordinates.

- Zero or more textures, with the precise number allowed being limited by the GPUs your game can run on. All GPUs should support at least three textures per model. A texture is a rectangle containing image data that's been loaded on the GPU, either directly or using a render-to-texture operation.

- A list of shader part names. Ren'Py uses these shader parts to create shaders, which are programs that are run on the GPU to render the model. Shader part names can be prefixed with a "-" to prevent that shader part from being used.

- Uniform values. A uniform is additional data that is the same throughout the model. For example, when a model represents a solid color, the color is a uniform.

- GL properties. GL properties are flags that further control how things are rendered, such as the minification/magnification modes and the color mask.

As Ren'Py usually draws more than one thing to the screen, it creates a tree of `Render` objects. These Render objects may have Models or other Renders as children. (A Render object can also be turned into a Model. as described below.) A Render contains:

- A list of children, including a 2-dimensional offset that is applied to each child.

- A `Matrix` that describes how the children are transformed in three-dimensional space.

- Lists of shader part names, uniforms, and GL properties that are applied to the Models when being drawn.

- Flags that determine if the drawable-space clipping polygon should be updated.

Ren'Py draws the screen by performing a depth-first walk through the tree of Renders, until a Model is encountered. During this walk, Ren'Py updates a matrix transforming the location of the Model, a clipping polygon, and lists of shader parts, uniforms, and GL properties. When a Model is encountered as part of this walk, the appropriate shader program is activated on the GPU, all information is transferred, and a drawing operation occurs.

## Where Models are Created

Ren'Py creates Models automatically as part of its normal operation. The main reason to understand where models are created is that models correspond to drawing operations, and hence are the units that shaders are applied to.

Images and Image Manipulators

  These create a model with a mesh containing two triangles that cover the rectangle of the image. The mesh contains texture coordinates. The model uses the "renpy.texture" shader.

`Solid()`

  The Solid displayable creates a mesh containing two triangles, and no texture coordinates. The model uses the "renpy.solid" shader, with the color placed in the `u_renpy_solid_color` uniform.

`Dissolve()`, `ImageDissolve()`, `AlphaDissolve()`, `Pixellate()`, `AlphaMask()`, `Flatten()`

  Each of these transforms and displayables creates a Model with a mesh, shaders, and uniforms as is needed for its purposes.

Live2D

  Live2D displayables may created multiple Models when rendered, generally one Model for each layer.

`Transform()` and ATL

  A Transform creates a model if `mesh` is True, or if `blur` is being used. In this case, the children of the Transform are rendered to textures, with the mesh of the first texture being used for the mesh associated with the model.

  Not every transform creates a Model. Some transforms will simply add shaders and uniforms to a Render (such as transforms that use `blur` or `alpha`). Other transforms simply affect geometry.

`Render`

  A Transform creates a model if its `mesh` attribute is True. In this case, the children of the Render are rendered to textures, with the mesh of the first texture being used for the mesh associated with the model.

It's expected that Ren'Py will add more ways of creating models in the future.

## Shader Program Generation

Ren'Py generates a shader program by first assembling a list of shader part names. This list consists of "renpy.geometry", the list of shader parts taken from Renders, and the list of shader parts found in the Model being drawn.

The shader parts are then deduplicated. If a shader part begins with "-", it is removed from the list, as is the rest of that part without the leading "-". (So "-renpy.geometry" will cause itself and "renpy.geometry" to be removed.)

Ren'Py then takes the list of shader parts, and retrieves lists of variables, functions, vertex shader parts, and fragment shader parts. These are, in turn, used to generate the source code for shaders, with the parts of the vertex and fragment shaders being included in low-number to high-number priority order.

This means that any variable created by one of the shaders will be accessible by every other fragment from any other shader in the list of shader parts. There is no scope like in Python functions to protect interference between shaders.

Ren'Py keeps a cache of all combinations of shader parts that have ever been used in game/cache/shaders.txt, and loads them at startup. If major changes in shader use occur, this file should be edited or deleted so it can be re-created with valid data.

## Creating a Custom Shader

New shader parts can be created by calling the renpy.register_shader function and supplying portions of GLSL shaders.

Generally, shader parts should be of the form "namespace.part", such as "mygame.recolor" or "mylibrary.warp". Names beginning with "renpy." or "live2d." are reserved for Ren'Py, as are names beginning with _.

renpy.register_shader(name, **kwargs)

  This registers a shader part. This takes name, and then keyword arguments.

  name

    A string giving the name of the shader part. Names starting with an underscore or "renpy." are reserved for Ren'Py.

  variables

    The variables used by the shader part. These should be listed one per line, a storage (uniform, attribute, or varying) followed by a type, name, and semicolon. For example:

        variables='''
        uniform sampler2D tex0;
        attribute vec2 a_tex_coord;
        varying vec2 v_tex_coord;
        '''

  vertex_functions

    If given, a string containing functions that will be included in the vertex shader.

  fragment_functions

    If given, a string containing functions that will be included in the fragment shader.

  Other keyword arguments should start with `vertex_` or `fragment_`, and end with an integer priority. So "fragment_200" or "vertex_300". These give text that's placed in the appropriate shader at the given priority, with lower priority numbers inserted before higher priority numbers.

Ren'Py supports only the following variable types:

- float (a Python float)

- vec2 (a tuple of 2 floats)

- vec3 (a tuple of 3 floats)

- vec4 (a tuple of 4 floats)

- mat2 (a `Matrix`)

- mat3 (a `Matrix`)

- mat4 (a `Matrix`)

- sampler2D (a Displayabe, including strings that give Displayables, or a Render)

Uniform variables should begin with u_, attributes with a_, and varying variables with v_. Names starting with u_renpy_, a_renpy, and v_renpy are reserved, as are the standard variables given below.

As a general sketch for priority levels, priority 100 sets up geometry, priority 200 determines the initial fragment color (gl_FragColor), and higher-numbered priorities can apply effects to alter that color.

Here's an example of a custom shader part that applies a gradient across each model it is used to render:

    init python:

        renpy.register_shader("example.gradient", variables="""
            uniform vec4 u_gradient_left;
            uniform vec4 u_gradient_right;
            uniform vec2 u_model_size;
            varying float v_gradient_done;
            attribute vec4 a_position;
        """, vertex_300="""
            v_gradient_done = a_position.x / u_model_size.x;
        """, fragment_300="""
            float gradient_done = v_gradient_done;
            gl_FragColor *= mix(u_gradient_left, u_gradient_right, gradient_done);
        """)

The custom shader can then be applied using a transform:

    transform gradient:
        shader "example.gradient"
        u_gradient_left (1.0, 0.0, 0.0, 1.0)
        u_gradient_right (0.0, 0.0, 1.0, 1.0)

    show eileen happy at gradient

As stated before, the `gradient_done` variable from the example.gradient shader will be accessible by any and all other shaders applied from the same list. This can be useful when having optional parts in a given shader system, but it can also lead to name collisions when using two independent shaders.

There is a variable that can help in debugging custom shaders:

define config.log_gl_shaders = False

  If true, source code for the GLSL shader programs will be written to log.txt on start.

## Shader Part Local Variables

Variables can be declared shader-local by using one of `u__`, `a__`, `v__`, or `l__` as a prefix. When this is done, the double underscores are filled in with the shader name with all dots replaced with underscores. For example, if the shader name is `example.gradient`, the prefix `u__` will be replaced with `u_example_gradient_`.

The main use of this is with text shaders, where most uniforms are shader-local. Also, local variables inside the shader should be declared with `l__`.

## Transforms and Model-Based Rendering

Model-Based rendering adds the following properties to ATL and `Transform()`:

mesh
  Type:

    None or True or tuple

  Default:

    None

  If not None, this Transform will be rendered as a model. This means:

  - A mesh will be created. If this is a 2-component tuple, it's taken as the number of points in the mesh, in the x and y directions. (Each dimension must be at least 2.) If True, the mesh is taken from the child.

  - The child of this transform will be rendered to a texture.

  - The renpy.texture shader will be added.

mesh_pad
  Type:

    None or tuple

  Default:

    None

  If not None, this can either be a 2 or 4-component tuple. If mesh is True and this is given, this applies padding to the size of the textures applied to the textures used by the mesh. A 2-component tuple applies padding to the right and bottom, while a 4-component tuple applies padding to the left, top, right, and bottom.

  This can be used, in conjunction with the `gl_pixel_perfect` property, to render text into a mesh. In Ren'Py, text is rendered at the screen resolution, which might overflow the boundaries of the texture that will be applied to the mesh. Adding a few pixels of padding makes the texture bigger, which will display all pixels. For example:

      transform adjust_text:
          mesh True
          mesh_pad (10, 0)
          gl_pixel_perfect True
          shader "shaders.adjust_text"

  will ensure that the texture passed to the shader contains all of the pixels of the text.

shader
  Type:

    None or str or list of str

  Default:

    None

  If not None, a shader part name or list of shader part names that will be applied to this Render (if a Model is created) or the Models reached through this Render.

blend
  Type:

    None or str

  Default:

    None

  if not None, this should be a string. This string is looked up in `config.gl_blend_func` to get the value for the gl_blend_func property. It's used to use alternate blend modes.

  The default blend modes this supports are "normal", "add", "multiply", "min", and "max".

In addition, uniforms that start with u_ but not with u_renpy are made available as Transform properties. GL properties are made available as transform properties starting with gl_. For example, the color_mask property is made available as gl_color_mask.

## Blend Functions

define config.gl_blend_func = { ... }

  A dictionary used to map a blend mode name to a blend function. The blend modes are supplied to the gl_blend_func property, given below.

The default blend modes are:

    gl_blend_func["normal"] = (GL_FUNC_ADD, GL_ONE, GL_ONE_MINUS_SRC_ALPHA, GL_FUNC_ADD, GL_ONE, GL_ONE_MINUS_SRC_ALPHA)
    gl_blend_func["add"] = (GL_FUNC_ADD, GL_ONE, GL_ONE, GL_FUNC_ADD, GL_ZERO, GL_ONE)
    gl_blend_func["multiply"] = (GL_FUNC_ADD, GL_DST_COLOR, GL_ONE_MINUS_SRC_ALPHA, GL_FUNC_ADD, GL_ZERO, GL_ONE)
    gl_blend_func["min"] = (GL_MIN, GL_ONE, GL_ONE, GL_MIN, GL_ONE, GL_ONE)
    gl_blend_func["max"] = (GL_MAX, GL_ONE, GL_ONE, GL_MAX, GL_ONE, GL_ONE)

As Ren'Py uses premultiplied alpha, the results of some of these may be counterintuitive when a pixel is not opaque. In the GPU, the color (r, g, b, a) is represented as (r * a, g * a, b * a, a), and the blend function uses these premultiplied colors. This may be a different result that you get for these blend modes in a paint program, when what is drawn is not fully opaque.

## Float, Sample, and Vector Uniforms

The following uniforms are made available to all models.

`vec2 u_model_size`

  The width and height of the model, as supplied to Ren'Py. This is only available for 2D models that supply a size, and is (0, 0) for 3d models.

`float u_lod_bias`

  The level of detail bias to apply to texture lookups. This may be set in a Transform. The default value, taken from `config.gl_lod_bias` and defaulting to -0.5, biases Ren'Py to always pick the next bigger level and scale it down.

`float u_time`

  The time of the frame. The epoch is undefined, so it's best to treat this as a number that increases by one second a second. The time is modulo 86400, so it will reset to 0.0 once a day.

`vec4 u_random`

  Four random numbers between 0.0 and 1.0 that are (with incredibly high likelyhood) different from frame to frame.

`vec4 u_viewport`

  This gives the current viewport being drawn into. u_viewport.xy is are the coordinates of the bottom-left corner of the viewport, relative to the bottom-left corner of the window. u_viewport.pq is the width and height of the viewport.

`vec2 u_virtual_size`

> This is the virtual size of the game (`config.screen_width`, `config.screen_height`). This can be used to convert from gl_Position to virtual coordinates using:

>     v_position = u_virtual_size * vec2(gl_Position.x * .5 + .5, -gl_Position.y * .5 + .5)

`vec2 u_drawable_size`

  The size of the drawable are of the windows, in pixels, at the resolution the game is running at. For example, if a 1280x720 game is scaled up to 1980x1080, this will be (1920, 1080).

`sampler2D tex0`, `sampler2D tex1`, `sampler2D tex2`

  If textures are available, the corresponding samplers are placed in this variable.

`vec2 res0`, `vec2 res1`, `vec2 res2`

  If textures are available, the size of the textures are placed in these variables. When the texture is loaded from disk, this is the size of the image file. After a render to texture, it's the number of drawable pixels the rendered texture covered.

In addition, if a sampler uniform is available, then suffixing it with `__res` will give a vec2 containing the underlying texture size. For example, `u_markup__res` will give the size of the `u_markup` texture.

## Matrix Uniforms

The following uniforms are made available to all models. This assumes that only one transform with the `perspective` property is used to render a model. When multiple transforms with the `perspective` are used, the innermost transformation with perspective set defines the world and view spaces.

`mat4 u_projection`

  This is a matrix that transforms coordinates from view space to the OpenGL viewport. This is sent by Ren'Py, and is updated by transforms with the `perspective` property to encapsulate the effects of that property.

`mat4 u_view`

  This is a matrix that transforms vertex coordinates from the world space to the view space. This defaults to the identity matrix, but can be set by transforms with the `perspective` property, in which case the effects of positioning, rotation, and scaling are encapsulated in this matrix.

`mat4 u_model`

  This is a matrix that transforms vertex coordinates from the model space to the world space.

`mat4 u_projectionview`

  This matrix contains `u_projection * u_view`. It exists to minimize the number of uniforms that need to be sent to the GPU, and the amount of work that needs to be done in the shader.

`mat4 u_transform`

  This is the same as `u_projectionview * u_model`. It's the matrix that transforms vertex coordinates directly to the OpenGL viewport. It exists to minimize the number of uniforms that need to be sent to the GPU, the amount of work that needs to be done in the shader, and for compatibility with older versions of Ren'Py.

In addition to these methods, Ren'Py can synthesize matrices with certain functions applied when suffixes are appended to the matrix

`__inverse`

  When appended to a matrix, this returns the inverse of the matrix. For example, `u_projection__inverse` is the inverse of the projection matrix.

`__transpose`

  When appended to a matrix, this returns the transpose of the matrix. For example, `u_view__transpose` is the transpose of the view matrix.

`__inversetranspose`

  When appended to a matrix, this returns the inverse of the transpose of the matrix. For example, `u_model__inversetranspose` is the inverse of the transpose of the model matrix. This is useful for transforming normals.

## Attributes

The following attribute is available to all models:

`vec4 a_position`

  The position of the vertex being rendered. This is in virtual pixels, relative to the upper left corner of the texture.

If textures are available, so is the following attribute:

`vec2 a_tex_coord`

  The coordinate that this vertex projects to inside the textures.

If normals are available, so is the following attribute:

`vec3 a_normal`

  The normal of the vertex being rendered.

If tangents are available, so are the following attributes:

`vec3 a_tangent`

  The tangent of the vertex being rendered.

`vec3 a_bitangent`

  The bitangent of the vertex being rendered.

## GL Properties

GL properties change the global state of OpenGL, or the Model-Based renderer. These properties can be used with a Transform, or with the `Render.add_property()` function.

`gl_blend_func`

  If present, this is expected to be a six-component tuple, which is used to set the equation used to blend the pixel being drawn with the pixel it is being drawn to, and the parameters to that equation.

  Specifically, this should be (rgb_equation, src_rgb, dst_rgb, alpha_equation, src_alpha, dst_alpha). These will be used to call:

      glBlendEquationSeparate(rgb_equation, alpha_equation)
      glBlendFuncSeparate(src_rgb, dst_rgb, src_alpha, dst_alpha)

  Please see the OpenGL documentation for what these functions do. OpenGL constants can be imported from renpy.uguu:

      init python:
          from renpy.uguu import GL_ONE, GL_ONE_MINUS_SRC_ALPHA

  The `blend` transform property is generally an easy way to use this.

`gl_color_mask`

  This is expecting to be a 4-tuple of booleans, corresponding to the four channels of a pixel (red, green, blue, and alpha). If a given channel is True, the draw operation will write to that pixel. Otherwise, it will not.

`gl_depth`

  If True, this will clear the depth buffer, and then enable depth rendering for this displayable and the children of this displayable.

  Note that drawing any pixel, even transparent pixels, will update the depth buffer. As a result, using this with images that have transparency may lead to unexpected problems. (As an alternative, consider the `zorder` and `behind` clauses of the `show` statement.)

`gl_pixel_perfect`

  When True, Ren'Py will move the mesh such that the first vertex is aligned with a pixel on the screen. This is mostly used in conjunction with text, to ensure that the text remains sharp.

The following properties only take effect when a texture is being created, by a Transform with `mesh` set, or by `Model()`, where these can be supplied the property method.

`gl_drawable_resolution`

  If True or not set, the texture is rendered at the same resolution as the window displaying the game. If False, it's rendered at the virtual resolution of the displayable.

`gl_anisotropic`

  If supplied, this determines if the textures applied to a mesh are created with anisotropy. Anisotropy is a feature that causes multiple texels (texture pixels) to be sampled when a texture is zoomed by a different amount in X and Y.

  This defaults to True. Ren'Py sets this to False for certain effects, like the Pixellate transition.

`gl_mipmap`

  If supplied, this determines if the textures supplied to a mesh are created with mipmaps. This defaults to True.

`gl_texture_wrap`

  When supplied, this determines how the textures applied to a mesh are wrapped. This expects a 2-component tuple, where the first component is used to set GL_TEXTURE_WRAP_S and the second component is used to set GL_TEXTURE_WRAP_T, which conventionally are the X and Y axes of the created texture.

  The values should be OpenGL constants imported from renpy.uguu:

      init python:
          from renpy.uguu import GL_CLAMP_TO_EDGE, GL_MIRRORED_REPEAT, GL_REPEAT

  This can also be customized for specific textures. gl_texture_wrap_tex0 controls the first texture, gl_texture_wrap_tex1 the second, gl_texture_wrap_tex2, the third, and gl_texture_wrap_tex3 the fourth. While only these four are avalable through Transforms, it's possibe to supply "texture_wrap_tex4" or "texture_wrap_myuniform" to Render.add_property.

## GLTFModel Displayable

The GLTFModel displayble allow you to load 3D models in the GLTF file format. This is what you should use if you have a 3D model you created in another program and want to display in Ren'Py.

class GLTFModel(filename: 'str', textures: 'Iterable' = ('diffuse',), shader: 'str | tuple[str]' = 'renpy.texture', tangents: 'bool' = False, zoom: 'float' = 1.0, flip_x: 'bool' = False, flip_y: 'bool' = True, flip_z: 'bool' = False, flip_uv: 'bool' = True)

  A displayable that loads a 3D Model in the GLTF format. This format is supported by many 3D tools. Ren'Py uses the Open Asset Importer (assimp) library to load GLTF models.

  For the purposes of Ren'Py's 2D layout system, a GLTFModel has zero width and height. By default, the model is loaded at the size found in the file that contains it. If required, the zoom may be used to scale it.

  When multiple models are in use, the `gl_depth True` property should be supplied to the camera, so that depth testing is enabled. Ren'Py does not currently perform any culling of the model, so it's important to use models simple enough to be completely rendered.

  filename

    The filename of the model to display.

  textures

    A list of textures to load. These textures will be loaded into texture slots - the first will be tex0, the second tex1, and so on.

    The list may contain one of the following strings, giving the type of texture to load:

    - "none"

    - "diffuse"

    - "specular"

    - "ambient"

    - "emissive"

    - "height"

    - "normals"

    - "shininess"

    - "opacity"

    - "displacement"

    - "lightmap"

    - "reflection"

    - "base_color"

    - "normal_camera"

    - "emission_color"

    - "metalness"

    - "diffuse_roughness"

    - "ambient_occlusion"

    - "unknown"

    - "sheen"

    - "clearcoat"

    - "transmission"

    These correspond to the various textures defined by assimp. In many cases, you'll have multiple types packed into a single texture - like having a textuure that has metallic on the blue channel, roughness on the green, and ambient occlusion on the red. In that case, you'll want to pick one texture type to load, and use the texture shader to extract the channels you want.

    The textures list may also contain displayables, which will be used as textures directly.

  shader

    Either a string or tuple of strings, giving the name of the shader to use.

  tangents

    If True, tangents will be included in the mesh.

  zoom

    A zoom factor that will be applied to the model. Many models naturally use the range -1 to 1, and so this may need to be quite large to make the model visible.

  flip_x

    If True, the model will be flipped along the x axis.

  flip_y

    If True, the model will be flipped along the y axis. This defaults to True, to map models to Ren'Py's coordinate system.

  flip_z

    If True, the model will be flipped along the z axis.

  flip_uv

    If True, the UV coordinates will be flipped vertically. This defaults to True, to map texture coordinates to how Ren'Py expects them.

  GLTFModel.__init__(self, unicode filename: str, textures: Iterable = (u'diffuse'), shader: str | tuple[str] = u'renpy.texture', tangents: bool = False, double zoom: float = 1.0, flip_x: bool = False, flip_y: bool = True, flip_z: bool = False, flip_uv: bool = True)

## Model Displayable

The Model displayable acts as a factory to created models for use with the model-based renderer. This is an older API you may wish to use when you want to create models in Python.

class Model(size=None, **properties)

  This is a displayable that causes Ren'Py to create a 2D or 3D model for use with the model-based renderer, that will be drawn in a single operation with the shaders given here, or selected by an enclosing Transform or Displayable.

  size

    If not None, this should be a width, height tuple, that's used to give the size of the Model. If not given, the model is the size of the area provided to it. The fit parameter to a texture takes precedence.

  If no mesh method is called, a mesh that sets a_position and a_tex_coord to match the way Ren'Py loads textures is created if at least one texture is supplied. Otherwise, a mesh that only sets a_position is used.

  All methods on this calls return the displayable the method is called on, making it possible to chain calls.

  child(displayable, fit=False)

    This is the same as the texture method, except that the focus and main parameters are set to true.

  grid_mesh(width, height)

    Creates a mesh that consists of a width x height grid of evenly spaced points, connecting each point to the closest points vertically and horizontally, and dividing each rectangle in the grid so created into triangles.

    width, height

      The number of points in the horizontal vertical directions, a integer that is at least 2.

  property(name, value)

    Sets the value of a gl property.

    name

      A string giving the name of the GL property, including the "gl_" prefix.

    value

      The value of the gl property.

  shader(shader)

    Adds a shader to this model.

    shader

      A string given the name of a shader to use with this model.

  texture(displayable, focus=False, main=False, fit=False, texture_wrap=None)

    Add a texture to this model, by rendering the given displayable. The first texture added will be `tex0`, the second `tex1`, a and so on.

    focus

      If true, focus events are passed to the displayable. It's assumed that coordinate relative to the model map 1:1 with coordinates relative to the displayable.

    main

      If true, this is marked as a main child of this displayable, which allows it to be inspected using the displayable inspector.

    fit

      If true, the Model is given the size of the displayable. This may only be true for one texture.

    texture_wrap

      If not None, this is the gl_texture wrap GL property that will be applied to this texture.

  uniform(name, value)

    Sets the value of a uniform that is passed to the shaders.

    name

      A string giving the name of the uniform to set, including the "u_" prefix.

    value

      The value of the uniform. Either a float, a 2, 3, or 4 element tuple of floats, or a Matrix.

### Model Displayable Examples

The Model displayable can be used in conjunction with an ATL transform and a built-in shader to create the Dissolve transform:

    transform dt(delay=1.0, new_widget=None, old_widget=None):
        delay delay
        Model().texture(old_widget).child(new_widget)
        shader [ 'renpy.dissolve' ]

        u_renpy_dissolve 0.0
        linear delay u_renpy_dissolve 1.0

Using the Model displayable as the child of a displayable is incompatible with `mesh`, as the two both create models inside Ren'Py.

## Animated Shaders

When using shaders that depend on `u_time` to animate, one must be aware, that even though every shader on screen will run on every frame displayed, Ren'Py does not run on constant FPS, and will fall back to the minimum frame rate of 5 FPS if no displayables require to be redrawn.

When using an animating shader in an ATL transform, this can cause that shader to "stutter" and only animate properly while some other object on screen animates as well, in case the transform you're using it in does not cause redraws otherwise. In this case, an empty ATL loop can be introduced to force redraws to happen:

    transform fancy_shader:
        shader 'my_fancy_shader'
        pause 0
        repeat

`pause 0` will cycle the frames as fast as possible. You can also set different values for `pause` to specify a minimum frame rate, like `pause 1.0/30`.

## Shader Parts

For a list of shader parts that Ren'Py uses, see the Default Shader Parts.